Valves And Accessories
For TDI Air Starters
TDI offers a wide variety of valves, fittings
and accessories to help maximize the efficiency of your TurboTwin
Starters. Featured here are some of the more popular items. For
specific order numbers or additional accessory needs, contact
GCS Toll Free 1-877-659-6328
|
|
Control Valves
|
|
Small Exhaust Fittings for TurboTwin™ & TurboStart™
Threaded exhaust adapters allow NPT hard piping of the starter
exhaust using 1.5 or 2 inch pipe sizes on TurboTwin T-30 Series
starters and motors |
|
|
TDI Starter Relay Valves
TDI TurboValves™ provide "air over air" manual
operation or AC/DC electric pilot air solenoid control versions.
High flow design reduces pressure drop through the
valve for greater efficiency. Three bolt mounting lugs eliminate
distortion common to u-clamp mounting methods.
|
|
Exhaust Elbows for all TurboTwin™ & TurboStart™
Models
Various 90 degree exhaust piping adapters allow flexibility
and an easier fitting of starter exhaust plumbing on space constrained
installations. |
|
|
Strainers
Unlike the super fine mesh strainers required by some brands,
a coarse (#40 mesh) strainer will protect your TDI starter
from large debris such as welding slag or threaded pipe cuttings
...without frequent clogging.
|
 |
Large Exhaust Fittings for TurboTwin™ & TurboStart™
Threaded exhaust adapters allow NPT hard piping of the starter
exhaust using 3 or 4 inch pipe sizes on T-100 TurboTwin T100
Series and TurboStart™ 50 Series starters. |
|
